Carry 2 e-bikes or bikes with fenders on the back of your vehicle or RV with this heavy-duty, V-shaped rack. Included ramp lets you load heavy e-bikes with ease. Platform slides out for access to your rear cargo area.
Features:
Specs:
You Always have what I need and it’s in my hands Fast!
I think it’s a great product and easy to use assemble.
Heavy and well built rack. I have not used yet, but have not doubt that it will hold up.
Way too heavy & almost impossible to us e.
One of lower wheel cradles will not lock into place need to have this one cradle replaced please.
Over all I am happy with the bike rack it is sturdy well put together and easy to use. One exception the threaded pin for the 2" receiver on the truck, why is not a slip in pin instead it has spring nut?
This bike rack does what it says it will do. It's flexible, it's safe and it hold the weight it advertises. That all being said it's a real pain in the rear. I'm a big dude I can do all the lifting and shifting required to use it, but it's just a pain in the tail. The flexibility also causes it to shift in transit and more than once we have had the bikes shift into each other and scratch the frame.
This is a very heavy duty rack and my two 70 lbs e-bikes fit on great! It was also very easy to assemble.
these bikes are heavy tring to fit them on. the buttom wheels don't sit on the bar.
Heavy duty! Too adjustable! Takes a while to get bikes loaded back to same exact way each time. Stopped using and bought different brand.
First this was the only ebike rack that we could find that was recommended for travel trailers or fifth wheels. Now that it has arrived I see why. Its heavy gauge metal and rated to hold 300 lbs.
We will be carrying 2 YOLO e-beach cruisers that go about 75 lbs each.
This rack is well worth the cost and is a quality product.
Unit is very sturdy. It takes about 2-3 hours to assemble. The slide mechanism use a wax film to achieve low-friction movement. This could be better executed with a linear ball slide design to reduce movement. Locking mechanism would be sufficient to secure in place. Part 'AA' Cradle Housing is delivered in left and right hand designs. This is not explained during Step 10 assembly. Sort parts before assemble to get four of each design. No specific instructions are presented to locate 'N' Base on 'M' Slide Tubes. A guide for clearance calculations would be helpful.
Purpose of this product is to transport two eBikes weighing 65 pounds each. Lifting bikes onto rack is a two person job. Setting the rack into hitch is a two person job. In other words, this thing is heavy, so be careful with your back. I added a EcoHitch class III receiver (Item # 306-X7326) on my Kia Soul rated for maximum tongue weight: 300 lbs. Given that the rack weighs 75 pounds and two eBikes weigh 130 pounds, this rack is certified to carry the weight, even over rough roads.
I flat tow the Kia with invested $4,000 in eBikes, so the assurance for this racks justifies my purchase.
It's a nice solid bike rack for heavy bikes. I bought it because it is travel trailer approved. But it's tough to line your bikes up the first time and it is extreemly heavy and it does not fold out of the way when attached to your hitch. If your not a strong person you should probably stay away from this rack. But, if you need a strong rack that is travel trailer approved, this is the rack for you. Sacrifice one thing for another.
We own 2 Lectric Lite ebikes, well below the weight limit of the Go Aero rack. After experiencing multiple breaks and ordering extra parts, we had over $1,000 invested in the Go Aero bike rack. We finally,after 4 months, scrapped the Go Aero rack, cut our losses and purchased a Yakima rack. The Go Aero rack is extremely difficult to use for the ebikes we own and don't recommend this rack.
Bought it to put two Fat tire e-bikes on the back of our Jeep which we are pulling behind our Class A MH. Rack is a little heavy, but we’ll made. Two 73lb e-bikes easily behind the spare tire on the rear of the Jeep. Just got back from a 7000 Mike cross country trip. Rack worked perfectly. Bikes are solid with very minimal wobble. I did break one rubber tie, so I recommend getting a couple more. The bikes block the rear taillights on the Jeep so I also bought magnetic tail lights to stick on the back rails of the hitch. These worked great. I would note, it is a two person job to hang the inside bike (fat tire e-bikes are heavy).
Very heavy duty rack system perfect for the Rv trailers with back access needs. Our RV trailer has a back door and spare tire, yet this rack allows us to access everything while mounting two heavy ebikes!
It’s early. Just put on and did a short drive to check my installl. Took 2.5 hrs to put together and load bikes. The bike loading took awhile and it’s a two person job with two 55lbs ebikes. Once set though it should go faster. The rack got here two days earlier than first advertised. Some of the pieces could/will be upgraded to better quality and the arms secured with non locking pins will be changed out to reduce the little wobble it has.
Do you have a question about this Hitch Bike Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.